Keys and doors
2-11
negative (−) side facing up.
5. Put together the transmitter case by
fitting the hooks on the case.
6. Reinstall the transmitter case in the
key head.
7. Refit the removed half of the key head.
To replace the battery:
After the battery is replaced, the transmitter must be synchronized with the
remote keyless entry system’s control
unit. Press either the “ ” or “ ” button
six times to synchronize the unit.
1. Open the key head using a flat-head
screwdriver.
3. Open the transmitter case by releasing
the hooks.
1)
2. Remove the transmitter case from the
key head.
Negative (−) side facing up
4. Replace the old battery with a new
battery (type CR1620 or equivalent) making sure to install the new battery with the
& Replacing lost transmitters
If you lose a transmitter or want to
purchase additional transmitters (up to
four can be programmed), your transmitters should be reprogrammed for security
reasons. For details, contact your
SUBARU dealer and have the transmitters
programmed into the remote keyless entry
system.