Starting and operating
7-35
Hill start assist OFF indicator light is
illuminated
assist system when the brake pedal is
released. The driver is therefore able to
start the vehicle the same way as on a
level grade, just using the clutch and
accelerator pedal.
When using the Hill start assist system, a
braking effect may be felt even after the
brake pedal has been released. However,
this braking effect should disappear once
the clutch pedal is released.
If the braking power of the Hill start assist
system is insufficient after the brake pedal
is released, apply more braking power by
depressing the brake pedal again.
NOTE
A slight jolt may be felt when the
vehicle begins to move forward after
being reversed.
The Hill start assist system may not
operate on slight grades. Also, the Hill
start assist system does not operate in the
following cases.
& To activate/deactivate the Hill
start assist system
CAUTION
While the Hill start assist system is
deactivated, when starting on an
uphill grade, braking power is not
maintained if the brake pedal is
released. Start on an uphill grade
by using the parking brake.
.
.
.
.
or
.
when starting backward facing uphill
when starting forward facing downhill
while the parking brake is applied
while the ignition switch is in the “ACC”
“LOCK” position
while the Hill start assist warning light/
You can activate/deactivate the Hill start
assist system according to the following
procedure.
NOTE
If you make an error when performing
any steps in the following procedure,
– CONTINUED –