Audio
NOTE
You cannot set Bluetooth® audio while
driving.
! Registering (pairing) device
NOTE
Only one device can be registered.
1. Select the following menu.
– “PAIR AUDIO” (type B audio)
– “Pair Audio Player” (type C audio)
If a device is already registered, “MEMORY FULL” is displayed and the mode
changes to the Bluetooth® audio setting
mode.
2. After the passkey is shown on the
display, input the passkey into the device.
– If you input the correct passkey,
“PAIRED” is displayed and the registration procedure is finished.
– If you input an incorrect passkey,
“FAILED” is displayed, the registration
procedure was not successful and the
mode changes to the Bluetooth®
audio setting mode.
NOTE
After the ignition switch is turned to the
“LOCK” position, the registered device
is not automatically connected to the
system even if the ignition switch is
5-35
turned to the “ACC” or “ON” position.
! Deleting device
! Selecting device
1. Select the following menu.
– “DELETE AUDIO” (type B audio)
– “Delete Audio Player” (type C
audio)
1. Select the following menu.
– “SELECT AUDIO” (type B audio)
– “Select Audio Player” (type C audio)
If no devices are registered, “EMPTY” is
displayed and the mode changes to the
Bluetooth® audio setting mode.
2. Select the “CONFIRM” menu.
– If the device is connected, “SELECTED” is displayed and the selecting procedure is finished.
– If the device cannot be connected,
“FAILED” is displayed and the selecting procedure was not successful.
! Setting passkey
1. Select the “SET PASSKEY” menu.
– After the currently set passkey is
displayed, a new passkey can be
entered.
2. Input the new passkey by operating
the “TUNE/TRACK/CH” dial.
3. Select the “CONFIRM” menu.
– The new passkey is displayed, the
passkey is changed and the mode
changes to the Bluetooth® audio
setting mode.
If no devices are registered, “EMPTY” is
displayed and the mode changes to the
Bluetooth® audio setting mode.
2. Select the “CONFIRM” menu.
– “DELETED” is displayed and the
mode changes to the Bluetooth®
audio setting mode.
& Bluetooth® audio operation
NOTE
Depending on the connected device, it
may not activate as per the following
items or not work smoothly.
! How to play back
Press the
button and select the “BTA” (type B audio)/“BT Audio” (type C
audio) mode.
! To select a track from its beginning
Select a track in the same way as for a
CD. Refer to “To select a track from the
beginning” F5-19.
– CONTINUED –