Instruments and controls
3-65
Light control switch
CAUTION
5. Reconfirmation will be displayed. If
you are sure you want to proceed, select
“Yes” by operating the “ ” switch.
7. The system will notify you that the
setting is complete for approximately 3
seconds.
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch
is turned to the “ ” (off) position.
If the vehicle is left unattended
for a long time with the light
control switch set to a position
other than “ ” (off) position, the
battery may be discharged.
NOTE
6. Confirm the setting again by pulling
the “ /SET” switch toward you.
. Even if the key is removed from the
ignition switch, the lights can be illuminated by operating the light control
switch from the “ ” (off) position to the
“
” or “ ” position.
. If the driver’s door is opened while
the lights are illuminated and the key is
removed from the ignition switch, the
chirp sound informs the driver that the
lights are illuminated.
– CONTINUED –