Keys and doors
& Moonroof switches
! Tilting moonroof
pletely. Pressing the switch continuously
may cause damage to the moonroof.
! Sliding moonroof
2-25
momentarily push the switch to the
“OPEN” side or “CLOSE” side.
After washing the vehicle or after it rains,
wipe away water on the roof prior to
opening the moonroof to prevent drops
of water from falling into the passenger
compartment.
NOTE
Driving with the moonroof fully open
can cause an annoying sound to be
generated at high speeds. If this occurs, use the moonroof at the initial
stop position of 16 in (40 cm) away
from the fully closed position.
1)
2)
Raise
Lower
The tilting function is activated only when
the moonroof is fully closed.
To raise:
Press the rear side of the “UP/DOWN”
switch momentarily. The moonroof raises
completely.
To lower:
Press and hold the front side of the “UP/
DOWN” switch until the preferred position
has reached.
Release the switch after the moonroof has
been raised or has been lowered com-
1)
2)
Open
Close
To open:
Slide the “OPEN/CLOSE” switch rearward. The sun shade will also be opened
together with the moonroof. The moonroof
will stop at a position approximately 16 in
(40 cm) away from the fully opened
position. Slide the switch rearward again
to open the moonroof completely.
To close:
Slide the “OPEN/CLOSE” switch forward.
To stop the moonroof at a selected midway position while opening or closing it,
! Anti-entrapment function
When the moonroof senses a substantial
enough object trapped between its glass
and the vehicle’s roof during closure, it
automatically moves back to the fully open
position and stops there. The anti-entrapment function may also be activated by a
strong shock on the moonroof even when
there is nothing trapped.
CAUTION
Never attempt to test this function
using fingers, hands or other parts
of your body.
– CONTINUED –