7-20
Starting and operating
the “AUTO [+]” mode. After setting the
mode, “
” on the combination meter
illuminates.
Pull the control switch rearward to select
the “AUTO [−]” mode. After setting the
mode, “
” on the combination meter
illuminates.
When the “AUTO [+]” mode is selected,
pull the control switch rearward to change
to the “AUTO” mode. When the “AUTO
[−]” mode is set, push the control switch
forward to change to the “AUTO” mode.
& Manual mode
In the manual mode, you can use the
center differential control switch to adjust
the initial LSD torque as desired. When
this mode is selected, the “AUTO” indicator light on the combination meter turns
off.
! Center differential control switch
and indicator light
The control switch is located beside the
parking brake lever. By pushing the
control switch forward or pulling it rearward, it is possible to change the