Chapter
Using the HD Radio (Digital Radio)
3 Press the center of MULTI-CONTROL to
start “BSM”.
BSM begins to flash. While BSM is flashing,
the six strongest broadcast frequencies will be
to
in
stored under the preset tuning keys
order of their signal strength. When this is
complete, BSM stops flashing.
p To cancel the storage process, press the
center of MULTI-CONTROL again.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
to .
have already saved by using
Pressing the center of MULTI-CONTROL
The function select screen appears.
Storing and recalling
broadcast frequencies
With a touch of any of the preset tuning keys
( to ), you can easily store up to six broadcast frequencies for later recall (also with the
touch of a key).
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
Display the “Function Menu” screen.
1 When you find a frequency that you
want to store in memory, keep touching a
preset tuning key to
until the preset
number (e.g., P.CH1) stops flashing.
The selected radio station has been stored in
memory.
1
Touch the same preset tuning key to
.
The radio station frequencies are recalled from
memory.
Using the HD Radio (Digital Radio)
Pressing and holding MULTI-CONTROL
left or right
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
p You can cancel seek tuning by pressing
MULTI-CONTROL left or right.
16
3 Pressing the center of MULTI-CONTROL
switches between on and off.
2
Storing the strongest
broadcast frequencies
= For details, refer to Screen switching overview on page 70.
2 Turn MULTI-CONTROL to display
“Local”.
4 Press MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Level1 — Level2 — Level3 — Level4
AM: Level1 — Level2
p The FM “4” (AM “2”) setting allows reception of only the strongest stations, while
lower settings let you receive weaker
stations.
“BSM” (best stations memory) lets you automatically store the six strongest broadcast frequencies under the preset tuning keys to
and, once stored there, you can tune in to
these frequencies with the touch of a key.
1
Display the “Function Menu” screen.
= For details, refer to Screen switching overview on page 70.
2 Turn MULTI-CONTROL to display
“BSM”.
Switching the seek mode
You can select the method of seek tuning.
1
Display the “Function Menu” scree