Adaptive Cruise Control
WARNING
• When the stay-stopped function is canceled by pressing the( CRUISE) switch, the vehicle will start to creep. Depress the brake pedal as necessary.
• Do not exit the vehicle while the stay-stopped function is engaged.
• The stay-stopped function is not a replacement for applying the electronic parking brake. When parking, always apply brakes manually to come to a full stop, then set the electronic parking brake.
• When you exit the vehicle, apply the electronic parking brake, shift the select lever to the“ P” position and turn the ignition switch to the OFF position.
CAUTION
The stay-stopped function will be canceled under the following conditions:
• The vehicle is in stay-stopped mode for approximately 10 minutes or more. A notification will sound 5 intermittent beeps, 1 short beep and 1 long beep.
• Any condition in which automatic cancellation is met. A notification sounds 1 short beep and 1 long beep.
� Page 93 After the stay-stopped function has been canceled, the electronic parking brake will be automatically applied and the electronic parking brake indicator light will illuminate. However, if any canceling condition for the electronic parking brake( i. e. the interlock system with the accelerator pedal, switch operation of the electronic parking brake, etc.) is fulfilled, the electronic parking brake will not work. For details, refer to the vehicle Owner’ s Manual. If the accelerator pedal is only slightly depressed while the stay-stopped function is activated, the stay-stopped function may be canceled, and the electronic parking brake may not work.
●Setting Adaptive Cruise Control while the electronic parking brake is applied If the electronic parking brake is applied before setting Adaptive Cruise Control, release the electronic parking brake by depressing the accelerator pedal or by other specified means. For details of how to release the electronic parking brake, refer to the vehicle Owner’ s Manual.
91