Adaptive Cruise Control
CAUTION
• When the vehicle is following the lead vehicle, the actual vehicle speed is controlled according to the lead vehicle. Therefore, if the RES / SET switch is pressed to the“ RES /+” side and set to a speed higher than the speed of the lead vehicle, the vehicle will not accelerate; it will maintain a safe following distance as the first priority. However, because doing so changed the set vehicle speed, when the lead vehicle is no longer detected( for example, if you change to a freeway lane with no vehicles in front), the vehicle will accelerate to that new set vehicle speed. Change the set vehicle speed while briefly checking the value shown in the set vehicle speed display on the combination meter display.
• When the accelerator pedal is depressed with Adaptive Cruise Control on, automatic braking control and warnings by Adaptive Cruise Control will not occur. However, if there is a high risk of collision with an obstacle in front of the vehicle at this time, the warning and braking control of Pre-Collision Braking System may activate.
■ Decreasing the set vehicle speed
●Using the RES / SET switch
• Push to the“ SET /-” side briefly. Every time the switch is pushed, the set vehicle speed will decrease in decrements of 1 mph( 1 km / h).
• Push to the“ SET /-” side continuously. While the switch is being pushed, the set vehicle speed will decrease in decrements of 5 mph( 5 km / h).
When operating the switch, the set vehicle speed changes on the combination meter display.
H00897
●Using the brake pedal
1. Depress the brake pedal to decrease the vehicle speed. Adaptive Cruise Control will be canceled and( Adaptive Cruise Control indicator) changes from green to white.
2. When the desired speed is reached, press the RES / SET switch to the“ SET /-” side. The speed at the time of pressing the switch will be set as the new set vehicle speed, and it appears on the combination meter display.
84