Adaptive Cruise Control
� Continued from previous page
• Adaptive Cruise Control is designed for use on expressways, freeways, toll roads, interstate highways and similar limited access roads. It is not intended to be used in city traffic. In the following conditions, do not use Adaptive Cruise Control. Doing so may result in an accident.- Ordinary roads( roads other than those mentioned above)
Depending on the driving environment( complexity of roads and other factors), the system may not be able to perform as the traffic conditions require, and that may result in an accident.- Sharp curves or winding roads- Frozen roads, snow-covered roads or other slippery road surfaces
The tires may spin, causing loss of control of the vehicle.
- Traffic conditions when frequent acceleration and deceleration make it difficult to maintain the following distance It may not be possible for the system to perform as the traffic conditions require.
- Steep downhill grades The set vehicle speed may be exceeded.
- On a steep continuous downhill grade The brakes may overheat.
- Roads and overpasses with repeated steep uphill and downhill grades Detection of the vehicle in front may be lost, or the road surface may be detected instead of the vehicle in front, making correct control impossible.
- Entering a sharp curve / turn into an interchange or junction, or a service area, parking area, toll booth or other facilities Detection of the vehicle in front may not be possible.
70