Pre-Collision Braking System
• The system may not operate correctly under the conditions listed below. When these conditions occur, turn off Pre-Collision Braking System.
� Page 64- The tire pressure is not correct. * 1- The temporary spare tire is installed. * 1- Tires that are unevenly worn or tires with uneven wear patterns are installed. * 1- Tires that are the wrong size are installed. * 1- A flat tire has been fixed temporarily with a tire repair kit.- The suspension has been modified( including a genuine SUBARU suspension that has been modified).- An object that obstructs the camera’ s view is installed on the vehicle.- Tire chains are installed.- The headlights are dirty or they have snow and ice or dirt on them.( Objects are not correctly illuminated and are difficult to detect.)- The optical axes are not aligned correctly.( Objects are not correctly illuminated and are difficult to detect.)- The lights including headlights and fog lights have been modified.- Vehicle operation has become unstable due to an accident or malfunction.- The brake system warning light is illuminated in red. * 2- The vehicle is tilted at an extreme angle due to loaded cargo or other factors.- The maximum number of occupants is exceeded.- The combination meter is not operating properly; such as when the lights do not illuminate, the beeps do not sound, the display is different from when it is normal, etc. * 3
* 1: The wheels and tires have functions that are critically important. Be sure to use the correct ones. For details, refer to the vehicle Owner’ s Manual.
* 2: If the brake system warning light does not turn off, immediately pull the vehicle over in a safe place and contact a SUBARU dealer to have the system inspected. For details, refer to the vehicle Owner’ s Manual.
* 3: For details about the combination meter, refer to the vehicle Owner’ s Manual.
Continued on next page �
37