Conventional Cruise Control
NOTE
• When the main cruise control is off and the( CRUISE) switch is pressed, Adaptive Cruise Control is activated.
• When the main cruise control is on, switching between Adaptive Cruise Control and Conventional Cruise Control is possible by pressing the /( Following distance setting) switch *. *: To switch to Conventional Cruise Control, press and hold the switch for approximately 2 seconds or longer.
• Conventional Cruise Control can be used even when EyeSight is temporarily stopped.
How to use Conventional Cruise Control
■ Setting Conventional Cruise Control
1. Setting Adaptive Cruise Control to standby status Press the( CRUISE) switch. At this time,( Adaptive Cruise Control indicator)( white), your vehicle indicator and the following distance setting indicator are displayed on the combination meter display. The set vehicle speed display will read“--- MPH(--- km / h)”. When the( CRUISE) switch is pressed, the initial cruise control mode is always Adaptive Cruise Control.
( 1)( 2)
( 3)
H00541
H02249
( 1) Adaptive Cruise Control indicator( white)
( 2) Following distance setting indicator( 12.3-inch display models)
( 3) Following distance setting indicator( 4.2-inch display models)
177