About EyeSight
• Replace damaged wiper blades or worn wiper blade rubbers as soon as possible. Using damaged wiper blades or worn wiper blade rubbers may cause streaking on the windshield. The camera may not be able to detect objects accurately and the EyeSight system may not function properly due to streaks or droplets remaining on the windshield.
• Do not install any accessories on the front side such as on the hood or the grille. It may affect the camera view and the system may not operate correctly.
• Make sure that the cargo loaded on the roof does not interfere in the camera’ s field of view. Obstructing the camera’ s view may impair the system operation. For details,
S01098 contact a SUBARU dealer.
• Keep the windshield( outside and inside) clean at all times. When the windshield has become fogged, or it has a dirt or an oil film on it, the camera may not detect objects accurately and the EyeSight system may not operate correctly. Never mount any device or accessories to the center air vent, as any airflow change may impact EyeSight performance.
• Do not use any glass coating agents or similar substances on the windshield. Doing so may interfere with the proper operation of the system.
• Do not install any film or an additional layer of glass on the windshield. The system may not operate correctly.
• If there are scratches or cracks on the windshield, contact a SUBARU dealer.
• To have the windshield replaced or repaired, contact a SUBARU dealer. Do not install a windshield other than a genuine SUBARU windshield. The camera may not be able to detect objects accurately and the EyeSight system may not operate properly.
Handling of Radar Sensors( if equipped)
For details, refer to the vehicle Owner’ s Manual.
15