528
MAINTENANCE AND SERVICE
2. Remove the transmitter case from the key head.
6. Reinstall the transmitter case in the key head.
7. Refit the removed half of the key head.
After the battery is replaced, the transmitter must be synchronized with the remote keyless entry system’ s control unit. Press either the“” or“” button six times to synchronize the unit.
S _ B02416-MW
3. Open the transmitter case by releasing the hooks.
S _ B02417-W
4. Replace the old battery with a new battery( type CR2025 or equivalent) making sure to install the new battery with the negative( −) side facing up.
S _ B02498-W
Negative( −) side facing up
5. Put together the transmitter case by fitting the hooks on the case.