408
STARTING AND OPERATING
turn on automatically.
Also, the following settings can be changed by operating the center information display.
. Warning volume. Sonar Audible Alarm
For details, refer to“ Settings icon( Car settings)” FP231.
S _ 703304-W
Sonar Audible Alarm OFF indicator RAB OFF indicator
The RAB OFF indicator or the Sonar Audible Alarm OFF indicator will turn off when the corresponding function is turned ON.
NOTE
. When the settings cannot be changed, the ON / OFF setting key will be grayed out.
. The ON / OFF setting key may be grayed out if the Reverse Automatic Braking( RAB) system malfunctions, etc. In this case, turn the ignition switch to the“ OFF” position and then turn it to the“ ON” position again. If the setting cannot be changed even after turning the ignition switch to the“ ON” position again, consult your SUBARU dealer.
. As soon as you turn off the ignition switch, the Reverse Automatic Braking( RAB) ON / OFF setting is stored in the system. Therefore, when you turn the ignition switch from the“ OFF” state to the“ ON” position, the Reverse Automatic Braking( RAB) setting will revert to the state that was set before the ignition switch was turned off.
. When you turn the ignition switch off, the Sonar Audible Alarm ON / OFF settings will always reset, and the system will not store the settings of the function. Therefore, every time you turn the ignition switch to the“ ON” position, the Sonar Audible Alarm will
RAB WARNING INDICATOR s07bn07
S _ 703305-MW
RAB malfunction message RAB warning indicator
If the Reverse Automatic Braking( RAB) system malfunctions, the above indicator illuminates on the combination meter. Contact the nearest SUBARU dealer for details.
HANDLING OF THE SONAR SENSORS s07bn06
The 4 sonar sensors are located in the rear bumper. To ensure the proper operation of the Reverse Automatic Braking( RAB) system, observe the following precautions.