STARTING AND OPERATING 339
ALTERNATE OPERATION METHOD FOR MODELS WITH“ KEYLESS ACCESS WITH PUSH-BUTTON START SYS- TEM” s07az22 again.
3. After step 2, immediately press and hold the lock button. The hazard warning flashers then flash three times, and the horn will honk once.
4. Approximately 3 seconds after step 3, release the lock button. The engine will then start successfully.
Stopping the engine s07az2203
Press and hold the lock button to stop the engine with remote engine start system.
Remote start safety features s07az2204
For detailed information, refer to“ Remote start safety features” FP336.
7
Lock button
S _ 703263-W
An access key fob can be used as the remote engine start transmitter. Operate the lock button to start or stop the engine as follows.
Before starting the engine s07az2201
Before using the remote engine start system to start the engine, confirm the following conditions.
. The select lever is in the“ P” position.. All doors are closed.. The engine hood is closed.
. The push-button ignition switch is in the“ OFF” position.
Starting the engine s07az2202
To start the engine with remote engine start system, briefly press the lock button twice within 2 seconds, then press and hold the lock button for 3 seconds.
1. Press the lock button briefly. The hazard warning flashers then flash once and the buzzer chirps once.
2. Within 2 seconds, press the lock button briefly again. The hazard warning flashers then flash once again, and the buzzer chirps once
ENTERING THE VEHICLE WHILE IT IS RUNNING VIA RE- MOTE START( Models without“ Keyless Access with Push- Button Start System”) s07az03
1. Unlock the vehicle doors using the remote keyless entry system.
NOTE
If the vehicle’ s doors are unlocked manually using the key, the vehicle’ s alarm system will trigger( if the alarm system is armed prior to activating the remote engine start system) and the engine will turn off. Perform either of the following procedures to disarm the alarm system. Refer to“ Alarm System” FP142.
– Insert the key into the ignition switch and turn it to the“ ON” position.
– Press any button on the remote keyless entry transmitter.
2. Enter the vehicle. The engine will shut down when any door is opened.
3. Insert the key into the ignition switch and turn it to the“ START” position to restart the engine.
– CONTINUED –