INTERIOR EQUIPMENT 307
connecting a device, be sure to read the instruction manual of the device and check whether or not this specification of the output is supported by the device. If a device that requires power exceeding the maximum rating is connected, power supply or charging may not be possible. Even if charging could be completed, the time required for charging may be longer than when the genuine charger for that device is used.
. Depending on the device, charging may be possible only when a special cable is used. In this case, be sure to connect the device using the special cable.
. When a device that communicates with a PC is connected, power supply or charging may not be possible.
. When connect a device for charging, disconnect the device promptly after charging is completed.
Console USB port( if equipped):
S _ 602764-W
USB Type-C: DC 5 V / 3.0 A USB Type-A: DC 5 V / 2.4 A
Before using the USB port to use or charge an electronic device, turn the ignition switch to the“ ACC” or“ ON” position. The combined maximum output of the two USB ports is 5.4 A.
6
HOW TO USE THE USB POWER SUPPLY s06ay01
Front seat USB port:
S _ 602763-W
USB Type-C: DC 5 V / 3.0 A( if equipped)
USB Type-A: DC 5 V / 2.4 A