INSTRUMENTS AND CONTROLS 271
Memory function:
The angle of the reverse tilt-down mirror can be registered. Register the position with button“ 1”,“ 2” or each of the access key fobs and retrieve the position.
For details about registration or retrieval of a position, refer to“ Driver’ s Seat Memory Function” FP40.
NOTE
If the seat is moved forward or backward 1.18 in( 30 mm) or more, the reverse tiltdown will move to the factory default position or the last position hold.
Hold last position function:
The angle of the reverse tilt-down mirror can be set to the latest adjusted angle.
The hold last position function operates when the following condition are met.
. The memory function is not used.
. The seat is moved forward or backward 1.18 in( 30 mm) or more.
NOTE
. The factory setting( default setting) for this function is set as“ non-operational”. This setting can be changed to“ operational” at SUBARU dealers. For more details, contact a SUBARU dealer.
. If the hold last position function setting is“ non-operation”, the reverse tiltdown will move to the factory default position.
3-21. TILT / TELESCOPIC STEERING WHEEL s03bf
WARNING
. Do not adjust the steering wheel tilt / telescopic position while driving. This may cause loss of vehicle control and result in personal injury.
. If the lever cannot be raised to the fixed position, adjust the steering wheel again. It is dangerous to drive without locking the steering wheel. This may cause loss of vehicle control and result in personal injury.
Tilt adjustment Telescopic adjustment
S _ 307945-W
1. Adjust the seat position. Refer to“ Front Seats” FP37.
2. Pull the tilt / telescopic lock lever down.
3. Move the steering wheel to the desired level.
4. Pull the lever up to lock the steering wheel in place.
5. Make sure that the steering wheel is securely locked by moving it up and down, and forward and backward.
3