INSTRUMENTS AND CONTROLS 205
3-8. CENTER INFORMATION DISPLAY( CID) FEATURES
s03bs
WARNING
Always pay attention to safe driving when operating the center information display while the vehicle is in motion. When operation of the center information display is disturbing your awareness and ability to concentrate on driving, stop the vehicle in a safe place before performing operations on the display. Also, do not concentrate on the display while driving. Doing so could result in an accident.
All information is displayed on the center information display, including vehicle settings, vehicle status, navigation system( if equipped) operation, audio operation, and climate control operation.
Items
Page for dual 7.0-inch display models
Interruption screen 206
Vehicle status and maintenance information
Page for 11.6-inch display models
216 / 216 224
Vehicle settings 209 223
Climate control operations
208 222
Rear view camera 383
Surround View Monitor *
Navigation system
Audio / telephone
EyeSight
— 376
Refer to the navigation / audio Owner’ s Manual.
Refer to the navigation / audio Owner’ s Manual.
Refer to the Owner’ s Manual supplement for the EyeSight system.
*: If equipped
The center information display can also be used to set and initialize the center information display itself.
NOTE
. When the vehicle is in motion, certain functions and selections may not be available.
. The language and units for both the center information display and the combination meter display( color LCD) can be changed. For details, refer to the following sections.
–“ Settings icon( General settings)” FP210( dual 7.0-inch display
models) –“ Settings icon( General settings)”
FP227( 11.6-inch display models) For details about unit settings, refer to the following sections.
–“ Car settings icon” FP216( dual
7.0-inch display models) –“ Car settings icon” FP225( 11.6-
inch display models)
. The images displayed in this Owner’ s Manual are sample images. The actual image may vary depending on the region and vehicle specifications.
WELCOME SCREEN s03bs02
Welcome screen and Good-bye screen are motion graphic displayed on the combination meter display( color LCD) and center information display upon entering and exiting the vehicle.
When the driver’ s door is opened and closed, the welcome screen will appear for a short time.
NOTE
. The welcome screen will disappear when the ignition switch is turned to the“ ON” position while the welcome screen is shown.
. The welcome screen can be turned on or off. For details, refer to the following sections.
–“ Settings icon( General settings)” FP210( dual 7.0-inch display
models) –“ Settings icon( General settings)”
FP227( 11.6-inch display models)
3
– CONTINUED –