INSTRUMENTS AND CONTROLS 167
3
S _ 307526-MW
NOTE
. To turn the key from the“ ACC” to“ LOCK” position:
– Place the select lever in the“ P”
position. – Push in and turn the key.
. If your registered key fails to start the engine, pull out the key once( the security indicator light will blink), and then insert the key again and turn it to the“ START” position again to restart the engine.
. The engine may not start in the following cases:
S _ 307527-MW
– The key grip is touching another key or a metallic key holder.
S _ 307528-MW
– The key is near another key that contains an immobilizer transponder.
– The key is near or touching another
transmitter.
KEY REMINDER CHIME s03aa05
The reminder chime sounds when the driver’ s door is opened and the ignition switch is in the“ LOCK” or“ ACC” position.
The chime stops under the following conditions.
. The ignition switch is turned to the“ ON” position.
. The key is removed from the ignition switch.
. The driver’ s door is closed.
IGNITION SWITCH LIGHT s03aa06
For easy access to the ignition switch in the dark, the ignition switch light illuminates when driver’ s door is opened or when the driver’ s door is unlocked using the remote keyless entry transmitter.
The light remains illuminated for approximately 30 seconds and gradually turns off under the following conditions.
. The driver’ s door is closed.
. The doors are unlocked using the remote keyless entry transmitter.
– CONTINUED –