KEYS AND DOORS 155
Function is active Function is inactive
S _ 204493-W
When the Hands-Free Power Rear Gate off switch is pressed in, the Hands-Free Power Rear Gate function will be deactivated.
How to use the function s02au0503
1. Check if the Hands-Free Power Rear Gate off switch is set to active.
2. Make sure there is enough space behind the vehicle and carry the access key fob with you.
3. Move your foot into and then out of the kicking motion detection area within 1 second, and then take a step back to avoid hitting the rear gate.
S _ 204422-W
The electronic chirp will sound, and the rear gate will operate.
NOTE
. If you move your foot into the operation range while the rear gate is in opening, the rear gate will stop.
. If you perform a kicking motion while the rear gate is in closing, the rear gate will start opening.
. When the rear gate is opening or closing, you can use a kicking motion to stop or reverse the operation of the rear gate, even if you are not carrying the access key fob.
. In some situations, the Hands-Free Power Rear Gate function may activate accidentally. To prevent this from happening, turn off the function in the following cases.
– When the area around the rear bumper is equipped with outdoor
equipment, etc. – When washing the vehicle – When removing snow – When a small animal or an object,
such as a ball, crosses the kicking motion detection area
. The Hands-Free Power Rear Gate function may not operate properly in the following conditions.
– When you hold your foot under the
bumper. – When the standing position of a
kicking motion is too close to the
rear bumper. – When your foot comes in direct
contact with the bumper while
executing a kicking motion. – When executing a kicking motion
repeatedly. – When you slide your foot sideways
after executing a kicking motion. – In heavy rain – The rear bumper is very dirty. – The vehicle is covering by snow. – The system of the vehicle cannot
detect the access key fob. – When you are affected by the
environment around the vehicle. – When operating the function in a
location with strong radio waves or noise( e. g., near a radio tower, power plant or broadcast station),
2
– CONTINUED –