338
STARTING AND OPERATING
depending on the engine speed.
. When the gear position is“ 4” or less and you hold the shift paddle“+” for a long time, the gears will upshift to the gear position“ 6”.
. If the gear position indicator is not displayed or“ D” is displayed even when the shift lever is set to the“ M” position, the transmission may be malfunctioning. Consult your SUBARU dealer to have your vehicle inspected.
DRIVING TIPS s07bg05
. Always apply the foot or parking brake when the vehicle is stopped in the“ D” or“ R” position.
. Make sure to apply the parking brake when parking your vehicle. Do not hold the vehicle with only the transmission.
. Do not keep the vehicle in a stationary position on an uphill grade by using the“ D” position. Use the brake instead.
. The engine may, on rare occasions, knock when the vehicle rapidly accelerates or rapidly pulls away from a standstill. This phenomenon does not indicate a malfunction.
NOTE
If the accelerator and brake pedals are depressed at the same time, driving torque may be restrained. This is not a malfunction.
7-7. SI-DRIVE s07bc
SI-DRIVE( SUBARU Intelligent Drive) works to maximize hybrid system performance, control and efficiency.
This system consists of the following modes:
. Intelligent( I) mode. Sport( S) mode
Intelligent( I) mode is selected when the push-button ignition switch is turned to the“ ON” position. By adjusting the SI-DRIVE switch, the character of the power unit changes.
INTELLIGENT( I) MODE s07bc02
S _ 703347-W
The linear acceleration characteristic of the Intelligent( I) mode is ideal for normal driving usage.
The Intelligent( I) mode provides wellbalanced performance with greater fuel efficiency and smooth driveability without stress. Power delivery is moderate during acceleration for maximum fuel efficiency.
This is ideal for around-town driving and situations that do not require full power output. It provides better control in difficult driving conditions, such as slippery roads or loose surfaces, due to gentler throttle response.