240
INSTRUMENTS AND CONTROLS
The Steering Responsive Headlight OFF indicator light on the combination meter illuminates when SRH is turned off.
S _ 308078-W
Steering Responsive Headlight warning light
If SRH is malfunctioning, the Steering Responsive Headlight warning light on the combination meter illuminates and a message appears on the warning screen when the ignition switch is in the“ ON” position. It indicates that SRH has been deactivated. Contact a SUBARU dealer for an inspection.
NOTE
. The SRH function operative / non-operative status is kept when the hybrid system is turned off, even if the hybrid system is restarted.
. When you turn the ignition switch to the“ ON” position, the Steering Responsive Headlight OFF indicator light will illuminate and turn off after several seconds.
. SRH only activates when the vehicle is traveling forward at the speed of approximately 5 mph( 8 km / h) or more.
3-13. HEADLIGHT BEAM LE- VELER s03at
The LED headlights produce more light than conventional halogen headlights.
When the vehicle is carrying a heavy load and the headlight beams are angled upwards, the driver of an oncoming vehicle may experience glare.
To prevent this, the automatic headlight beam leveler adjusts the headlights to the optimum height automatically depending on the load the vehicle is carrying.
CAUTION
In certain circumstances, the headlights may become misaligned, and the headlight beam leveler will not reset them to the proper angle. This may occur after transporting your vehicle on a flat-bed truck, or if the vehicle is parked and restarted on different angles. In such cases, have the headlight alignment checked by a SUBARU dealer.
NOTE
If you are driving with the headlights set to high beam and the following conditions are met, the headlight beam leveler will be aimed slightly upwards so that the light shines further ahead of your vehicle.
. The SRH function is ON.
. The high beam setting of the headlights is ON.
. The vehicle speed exceeds approximately 20 mph( 32 km / h).
When these operating conditions are no longer met, this function is canceled and the headlight beam leveler will return to the original position.