INSTRUMENTS AND CONTROLS 235
cally, the headlights will turn on again.
Sensor for the auto on / off headlights s03ah0101
S _ 307957-W
Solar sensor and humidity sensor( if equipped)
Solar sensor
The location of the sensor is shown in the illustration.
CAUTION
If any object is placed on or near the sensor, the sensor may not detect the level of the ambient light correctly and the auto on / off headlights may not operate properly.
HIGH / LOW BEAM CHANGE( Dimmer) s03ah02
While the light control switch is in the“” or“ AUTO” position in a dark place, the headlights will turn on.
Pushing the lever forward and releasing it will activate the high beam. Pulling the lever rearward and releasing it will switch the headlights to low beam.
When the light control switch is in the“ AUTO” position, pushing the lever forward turns the High Beam Assist is on.
Refer to“ High Beam Assist Function” FP236.
When the headlights are on high beam, the high beam indicator light“” on the combination meter is also on.
HEADLIGHT FLASHER
s03ah03
S _ 307639-MW
CAUTION
Do not hold the lever in the flashing position for more than just a few seconds.
3
S _ 307638-MW
To flash the headlights, pull the lever toward you and then release it. The high beam will stay on for as long as you hold the lever. The headlight flasher works even though the lighting switch is in the off position.
When the headlights are on high beam, the high beam indicator light“” on the combination meter also illuminates.
– CONTINUED –