INSTRUMENTS AND CONTROLS 195
Inside warning chime
Ding, ding...( intermittent)
Ding
Ding
—
—
Ding
Ding, ding...( 7 seconds)
Outside warning chime
Operation indicator on push-button ignition switch
——
Beep, beep, beep, beep, beep( 5 times)
Short beep( 2 seconds)
Short beep( 2 seconds)
Beep, beep, beep, beep, beep( 5 times)
Long beep( 60 seconds max.)
—
—
—
—
—
——
Ding——
Status
The driver’ s door is opened while the push-button ignition switch is“ ACC” position and the select lever is in the“ P” position.
The push-button ignition switch is switched to“ OFF” while the driver’ s door is open.
Hybrid system operation warning: The driver’ s door is opened while the hybrid system is operating and the select lever is in the“ P” position.
Lockout warning: The doors are locked by following methods when an access key fob is left in the car.
. The door is closed when the lock lever of the door is in the lock position.
. The door is closed when the power door locking switch is in the lock position.
Access key lock-in warning: The door lock sensor is touched while the push-button ignition switch is“ OFF” and the access key fob is inside the vehicle.
Door ajar warning: The door lock sensor is touched while the ignition switch is in the“ OFF” position and one of the doors including the rear gate is opened.
Power warning: The door lock sensor is touched while you are carrying the access key fob, the push-button ignition switch is in a position other than“ OFF” and the select lever is in the“ P” position.
Access key warning: The vehicle is driven while the access key fob is not inside the vehicle.
Access key warning for hybrid system start: The push-button ignition switch is pressed while the access key fob is not inside the vehicle.
Action
Switch the push-button ignition switch to“ OFF”, or close the driver’ s door. When exiting the vehicle, be sure to switch the push-button ignition switch to“ OFF”.
Close the driver’ s door.
Switch the push-button ignition switch to“ OFF”, or close the driver’ s door. When exiting the vehicle, be sure to switch the push-button ignition switch to“ OFF”.
Take out the access key fob from the vehicle, and lock the doors. The doors cannot be locked while the access key fob is inside the vehicle. A chirp sound will be heard, and all doors will be unlocked.
Take out the access key fob from the vehicle, and lock the doors. If the access key fob is inside the vehicle, the doors cannot be locked.
Close the doors securely and lock them. If one of the doors including the rear gate is opened, the doors cannot be locked.
Return the access key fob inside the vehicle, or switch the pushbutton ignition switch to“ OFF”. If the push-button ignition switch is not switched to“ OFF”, the doors cannot be locked.
Carry the access key fob, and drive the vehicle.
Carry the access key fob, and press the push-button ignition switch.
3
– CONTINUED –