146
KEYS AND DOORS
When you close the door, it will automatically lock and then the following will occur.
. An electronic chirp sounds once.
. The hazard warning flashers flash once.
UNLOCKING THE DOORS s02ae02
Press the“” button to unlock the driver’ s door. An electronic chirp will sound twice and the hazard warning flashers will flash twice. To unlock all the doors and the rear gate, briefly press the“” button again within 5 seconds.
NOTE
If the interval between the first and second presses of the“” button for unlocking all the doors is extremely short, the system may not respond.
OPENING THE REAR GATE s02ae13
Press the“” button to unlock the rear gate. An electronic chirp will sound twice and the hazard warning flashers will flash twice.
This operation setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
SETTING AUDIBLE SIGNAL OPERATION s02ae07
Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock.
If desired, you can turn the audible signal off by operating the center information display.
For details, refer to“ Settings icon( Car settings)” FP226.
Furthermore, the volume setting of the audible signal can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
SELECTING HAZARD WARN- ING FLASHER OPERATION s02ae26
Using the hazard warning flasher, the system will give you a visible signal when the doors are locked or unlocked. If desired, you can turn the hazard warning flashers off by operating the center information display. For details, refer to“ Settings icon( Car settings)” FP226.
The setting can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
VEHICLE FINDER FUNCTION s02ae05
Use this function to find your vehicle parked among many vehicles in a large parking lot. Provided you are within 30 feet( 10 meters) of the vehicle, pressing the“” button three times in a 5-second period will cause your vehicle’ s horn to sound once and its hazard warning flashers to flash three times.
NOTE
If the interval between presses is too short when you press the“” button three times, the system may not respond to the signals from the remote transmitter.
SOUNDING A PANIC ALARM s02ae06
To activate the alarm, press the PANIC button once.
The horn will sound and the hazard warning flashers will flash.
To deactivate the panic alarm, press any button on the access key fob / transmitter. If a button on the access key fob / transmitter is not pressed, the alarm will be deactivated after approximately 30 seconds.
REPLACING THE BATTERY s02ae08
Refer to“ Replacing Battery” FP516.