KEYS AND DOORS 135
locked inside the vehicle. Before locking the vehicle, make sure that you have the access key fob.
. When the battery of the access key fob is discharged, or when operating it in a location with strong radio waves or noise( e. g., near a radio tower, power plant, broadcast station or an area where wireless equipment is used), or while talking on a cell phone, the operating ranges may be reduced, or the keyless access function may not operate. In such a case, perform the procedure described in“ Locking and Unlocking” FP456.
. The doors may lock or unlock when the car is being washed or exposed to a significant amount of water that touches the door handle while the key fob is still in the operating range.
How to lock and unlock s02ap0108
It is possible to perform the following operations when you are carrying the access key fob.
. Lock and unlock the doors.. Lock and unlock the rear gate. NOTE
. It is not possible to lock the doors including rear gate using the keyless access function when the push-button ignition switch is in the“ ACC” or“ ON” position. Refer to“ Switching Power Status” FP174.
. If the door handle is gripped with a gloved hand, the door lock may not be released.
. If the door lock sensor is touched four times or more repeatedly, the system will ignore the sensor operation.
. When performing the locking procedure too quickly, locking may not complete. After performing the locking procedure, it is recommended to pull the rear door handle to confirm that the doors have been locked.
. If any of the doors( including the rear gate) is not fully closed, the following will occur to alert you.
– An electronic chirp sounds five
times. – The hazard warning flashers flash
five times.
. If any of the doors or the rear gate is open, the doors including rear gate cannot be locked.
. Within 3 seconds after locking the doors and the rear gate using the keyless access function, it is not possible to unlock the doors and / or the rear gate using the keyless access function.
. When locking, be sure to carry the access key fob to prevent locking the access key fob in the vehicle.
. The setting of the hazard warning flasher operation can be changed by operating the center information display. For details, refer to“ Settings icon( Car settings)” FP226. Also, the setting of the hazard warning flasher operation can be changed by your SUBARU dealer. Contact your SUBARU dealer for details.
Locking the vehicle
Door lock sensor Rear lock button s02ap0109
S _ 204615-W
To lock all the doors, carry the access key fob with you and perform one of the following operations:
. Touch the door lock sensor.
2
– CONTINUED –