Towing 437 |
|||
|
After towing , remove the towing hook from the vehicle and stow it in the tool bucket .
Fit the towing hook cover on the bumper .
|
about the BSD / RCTA OFF switch , refer to “ BSD / RCTA OFF switch ” FP365 . |
! Rear tie-down holes |
S09AF0107 |
|
. To prevent deformation to the bumper and the towing hook , do not apply an excessive load to the towing hook .
. For models equipped with the BSD ( Blind Spot Detection ) and RCTA ( Rear Cross Traffic Alert ) driving support systems , when towing another vehicle , press the BSD / RCTA OFF switch to deactivate the system . The system may not operate properly due to the blocked radar waves . For details
|
The front tie-down hooks are located between each of the front tires and the front bumper . |
1 Rear tie-down hole
The rear tie-down holes are located near each of the jack-up reinforcements .
There is a plug in each rear tie-down hole . To use the rear tie-down holes , remove the
|
In case of emergency |
|||
– CONTINUED – |