|
& Reverse Automatic Braking ( RAB ) system ON / OFF setting
S07BN05
While the select lever is shifted to the “ R ” position , the below functions of the Reverse Automatic Braking ( RAB ) system can be set by operating the audio / navigation monitor .
1 ON setting key of Reverse Automatic Braking ( RAB ) system
2 OFF setting key of Reverse Automatic Braking ( RAB ) system
3 ON setting key of the object detection warning beeping sound
4 OFF setting key of the object detection warning beeping sound
When the ON setting key is shown , the corresponding setting is ON .
Touch and hold the ON setting key to turn the setting OFF .
|
When the OFF setting is shown , the corresponding setting is OFF .
Touch and hold the OFF setting key to turn the setting ON .
When the Reverse Automatic Braking ( RAB ) system is turned OFF , the following indicator will illuminate .
RAB OFF indicator : illuminates when the Reverse Automatic Braking ( RAB ) system is turned OFF .
RAB OFF indicator will turn off when the Reverse Automatic Braking ( RAB ) system is turned ON .
|
NOTE
. When the settings cannot be changed , the ON / OFF setting key will be grayed out .
. The ON / OFF setting key may be grayed out if the Reverse Automatic Braking ( RAB ) system malfunctions , etc . In this case , turn the ignition switch to the “ OFF ” position and then turn it to the “ ON ” position again . If the setting cannot be changed even after turning the ignition switch to the “ ON ” position again , consult your SUBARU dealer .
. As soon as you turn off the ignition switch , the Reverse Automatic Braking ( RAB ) ON / OFF setting is stored in the system . Therefore , when you turn the ignition switch from the “ OFF ” state to the “ ON ” position , the Reverse Automatic Braking ( RAB ) setting will revert to the state that was set before the ignition switch was turned off .
. When you turn the ignition switch off , the Sonar Audible Alarm ON / OFF settings will always reset , and the system will not store the settings of the function . Therefore , every time you turn the ignition switch to the “ ON ” position , the Sonar Audible Alarm will turn on automatically .
|
Starting and operating |
|||
– CONTINUED – |