Parking your vehicle 345 |
||||||
|
tem resetting .
. When a tire is repaired with liquid sealant , the tire pressure warning valve and transmitter may not operate properly . If a liquid sealant is used , contact your nearest SUBARU dealer or other qualified service shop as soon as possible . Make sure to replace the tire pressure warning valve and transmitter when replacing the tire . You may reuse the wheel if there is no damage to it and if the sealant residue is properly cleaned off . Do not inject any tire liquid or aerosol tire sealant into the tires , as this may cause a malfunction of the tire pressure sensors . If the light illuminates steadily after blinking for approximately 1 minute , promptly contact a SUBARU dealer to have the system inspected .
|
CAUTION
Do not place metal film or any metal parts in the cargo area . This may cause poor reception of the signals from the tire pressure sensors , and the tire pressure monitoring system will not function properly .
NOTE
This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions : ( 1 ) This device may not cause harmful interference , and ( 2 ) this device must accept any interference received , including interference that may cause undesired operation .
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment .
|
7-16 . Parking your vehicle
& Electronic parking brake
1 Parking brake switch 2 Indicator light 3 Release the electronic parking brake 4 Apply the electronic parking brake
WARNING
S07AP
|
S07AP03
. Before exiting the vehicle , make sure that you turn off the engine . Otherwise , the parking brake may be released and an accident may occur .
. If the brake system warning light turns on , the electronic parking brake system may be malfunctioning . Immediately stop your
|
Starting and operating |
||
– CONTINUED – |