Continuously variable transmission 323 |
||||||
|
7-7 . Continuously variable transmission
WARNING
S07BG
Do not shift from the “ P ” or “ N ” position into the “ D ” or “ R ” position while depressing the accelerator pedal . This may cause the vehicle to jump forward or backward .
CAUTION
. Observe the following precautions . Otherwise , the transmission could be damaged .
– Shift into the “ P ” or “ R ” position only after the vehicle has completely stopped .
– Do not shift from the “ D ” position into the “ R ” position or vice versa until the vehicle has completely stopped .
. Do not race the engine for more than 5 seconds in any position except the “ N ” or “ P ” position when the brake is applied or when chocks are used in the wheels . This may cause the transmission fluid to overheat .
|
. Never move the vehicle as follows . Doing so may result in an unexpected accident or malfunction .
– Moving rearward by inertia with the select lever set in a forward driving position .
– Moving forward by inertia with the select lever set in the “ R ” position .
. When parking the vehicle , first securely apply the parking brake and then place the select lever in the “ P ” position . Avoid parking for a long time with the select lever in any other position as doing so could result in a dead battery .
|
& Continuously variable transmission features
S07BG06
The continuously variable transmission is electronically controlled and provides an infinite number of forward speeds and 1 reverse speed . It also has a manual mode or an “ L ” position .
NOTE
. When the engine coolant temperature is still low , the transmission will shift at higher engine speeds than when the coolant temperature is sufficiently high in order to shorten the warm-up time and improve driveability . The gearshift timing will automatically shift to the normal timing after the engine has warmed up .
. Immediately after transmission fluid is replaced , you may feel that the transmission operation is somewhat unusual . This results from invalidation of data which the on-board computer has collected and stored in memory to allow the transmission to shift at the most appropriate times for the current condition of your vehicle . Optimized shifting will be restored as the vehicle continues to be driven for a while .
. When driving a CVT model under
|
Starting and operating |
|||
– CONTINUED – |