|
! Power mode
S04AI100103
Use this mode when climate control needs to be operate to increase the comfort quickly . This will reduce the operation range of the Auto Start Stop function .
! ECO mode
S04AI100104
Use this mode when fuel efficiency is prioritized over comfort . This increases the range of the Auto Start Stop operation .
! Occupant detection
S04AI1003
This mode switches the climate control operation according to the number of passengers .
|
and closing record of rear doors . If there are no passenger in the rear seat , the airflow of the climate control is reduced and priority is on the front seat passenger .
NOTE
If the system cannot judge correctly if there are passengers or not in the rear seat by the opening and closing of the rear door , such as when the doors are opened to place some cargo in the vehicle , the rear occupant detection may not operate properly .
|
4-4 . Manual climate control operation for front climate control panel
S04AJ
& Airflow mode selection
S04AJ01
Select the airflow mode using the airflow mode selection dial ( type A and C ) or the airflow mode selection button ( type B ).
Airflow modes are as follows .
|
Climate control |
||
|
! Front occupant detection
S04AI100301
This mode detects passenger by the occupant detection system sensor when there is no front passenger in the seat . The setting temperature will be changed to the driver ’ s setting temperature automatically .
NOTE
The occupant detection system sensor may not detect passengers because of their posture , physical size or weight . The front occupant detection function may not operate properly .
|
|||||
1 If equipped Ventilation : Instrument panel outlets |
|||||
|
! Rear occupant detection
S04AI100302
This function judges if there are any passenger in the rear seat by the opening
|
|||||
– CONTINUED – |