Light control switch 233 |
|
. The locking procedure is performed twice . When performing the unlocking procedure after performing the locking procedure , perform the locking procedure twice again .
* 1 : The setting for the period of time in which the low beam headlights remain on by the welcome lighting function can be changed by a SUBARU dealer . Contact your SUBARU dealer for details .
! Sensor for the auto on / off headlights
S03AH0101
|
rectly and the auto on / off headlights may not operate properly .
& High / low beam change ( dimmer )
S03AH02
|
& Headlight flasher |
CAUTION |
S03AH03 |
Instruments and controls |
|
1 High beam 2 Low beam
When the headlights are on high beam , the high beam indicator light “ ” on the combination meter is also on .
|
Do not hold the lever in the flashing position for more than just a few seconds .
To flash the headlights , pull the lever toward you and then release it . The high beam will stay on for as long as you hold the lever .
|
|||
|
The sensor is as shown in the illustration .
CAUTION
|
When the headlights are on high beam , the high beam indicator light “ ” on the combination meter also illuminates . |
|||
If any object is placed on or near the sensor , the sensor may not detect the level of the ambient light cor- |
– CONTINUED – |