Light control switch 231 |
|||||||
|
push-button start system ”).
. If the driver ’ s door is opened while the lights are illuminated and the key is removed from the ignition switch , the chirp sound will inform the driver that the lights are illuminated .
& Headlights
Except for Canada models
S03AH01
|
For Canada models
To turn on the headlights , turn the knob on the end of the turn signal lever .
“ ” position :
Instrument panel illumination , headlights , parking lights , front side marker lights , rear side marker lights , tail lights and license plate lights are on .
“ ” position :
Instrument panel illumination , parking lights , front side marker lights , rear side marker lights , tail lights and license plate lights are on .
“ ” position : . Auto on / off headlights
When the ignition switch is in the “ ON ” position , the instrument panel illumination , headlights , parking lights , front side marker
|
lights , rear side marker lights , tail lights and license plate lights are automatically on or off depending on the level of the ambient light .
NOTE
. The sensitivity of the auto on / off headlights can be changed by a SUBARU dealer . Consult your SUBARU dealer for details . Also , the setting can be changed using the display . For details , refer to “ Vehicle Setting ” FP199 .
. If the light control switch is in the “ AUTO ” position and the headlights do not turn on when it becomes dark outside , turn the light switch to the “ ” position . If this happens , have your vehicle inspected by your SUBARU dealer as soon as possible .
“ ” position ( except for Canada models ):
The headlights are all off .
Only when the following conditions are fulfilled , instrument panel illumination , headlights , parking lights , front side marker lights , rear side marker lights , tail lights and license plate lights are automatically on or off depending on the level of the ambient light .
. The engine is running . . The parking brake is fully released .
– CONTINUED –
|
Instruments and controls |