146
Rear gate
remain in the vehicle . Doing so could result in injury to the child operating the power rear gate .
. The driver should be aware of and pay careful attention to his / her responsibilities .
. Use the power rear gate only when the area around the rear gate is clearly visible and when you have checked that there is no danger of people being caught in the gate .
CAUTION
. When closing the rear gate after opening it , make sure to use the power rear gate . If the rear gate is closed manually with extra force , the power rear gate may be damaged .
. Do not install any accessories other than genuine SUBARU parts on the rear gate . If the weight of rear gate increases excessively , the rear gate stays cannot support the rear gate sufficiently when opening the rear gate . Also , the power rear gate may not function properly or may malfunction .
The power rear gate operates only when all of the following conditions are satisfied .
. The vehicle is stopped completely .
. The outside temperature is within a range of −228F to 1408F ( from −308C to 608C ).
. The ignition switch is in the “ LOCK ”/ “ OFF ” or “ ACC ” position . Or , the ignition switch is in the “ ON ” position and the select lever is in the “ P ” position .
We recommend using the power rear gate function in most circumstances instead of manual operation .
NOTE
. Do not press the power rear gate button repeatedly while the power rear gate is operating . Otherwise , the system may ignore the button operation in order to avoid being damaged .
. If the vehicle starts to move while the power rear gate is operating , the system sounds a buzzer and closes the rear gate automatically . At this time , if the system detects jamming , it will deactivate the power rear gate and the rear gate will not be closed . If this occurs , close the rear gate manually . For details , refer to “ Manual rear gate ” FP144 .
. If you try to open the rear gate using the power rear gate function immediately after closing the rear gate using the power rear gate function , an electronic chirp will sound and the rear gate will not open . Wait for a while before trying to open the rear gate via the power rear gate function .
. If either of the operating conditions has not been satisfied while operating the power rear gate , an electronic chirp will sound and the power rear gate will be deactivated . In this case , the rear gate may stop opening or closing suddenly .
! Operation
S02AJ0111
NOTE
. The rear gate will remain unlocked even after closing it . Always lock the rear gate when leaving the vehicle .
. If you cannot open / close the rear gate by performing the operation described here , a short electronic chirp will sound three times ( beep , beep , beep ).