Lane Departure Prevention Function
■ Canceling Lane Departure Prevention Function
●Canceling by driver operation Any of the following operations temporarily cancels Lane Departure Prevention Function . While temporarily canceling this function , ( Lane Keep Assist indicator ) on the combination meter display illuminates in white and the lane indicator turns gray .
• Depressing the brake pedal strongly
• Adaptive Cruise Control is activated when Lane Centering Function is set to on in the customizing functions . - Control changes to Lane Centering Function .
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane change .
• Turning on the hazard warning flasher switch
●Automatic cancellation by the system
Under the following conditions , a notification will sound 1 short beep and 1 long beep and Lane Departure Prevention Function is temporarily canceled . While the function is temporarily canceled ,
( Lane Keep Assist indicator ) on the combination meter display illuminates in white and the lane indicator turns gray . Also , an interruption screen is displayed on the combination meter display .
• The system does not detect the lane markings .
White
• The vehicle speed is less than approximately 37 mph ( 60 km / h ) or is more than
S03474 approximately 100 mph ( 160 km / h ).
• Vehicle Dynamics Control or Traction Control Function is activated .
• Any door ( except the rear gate ) is opened .
• The driver ’ s seatbelt is unfastened .
• The electronic parking brake is applied .
• The select lever is moved to a position other than “ D ”, “ M ” ( models with manual mode ) or “ L ” ( models with “ L ” position ). - Lane Departure Prevention Function can be resumed after the select lever is returned to the “ D ”, “ M ” or “ L ” position .
117