Head restraints 45 |
|
Then , adjust the head restraint to the preferred angle .
& Rear seats
S01AS02
Head restraints are installed in all secondrow seats and can be adjusted as described below .
! Window side seating position
S01AS0201
|
After installing the head restraint , make sure it is securely locked .
! Center seating position
|
S01AS0202 |
1 Head restraint 2 Release button |
Seat , seatbelt and SRS airbags |
|||
|
1 Head restraint 2 Release button
To remove :
Press the release button , and pull out the head restraint .
To install :
Push the head restraint into the holes on the top of the seatback until it locks . Press and hold the release button to lower the head restraint .
|
1 When not used ( retracted position ) 2 When used ( extended position )
CAUTION
The head restraint is not intended to be used in the retracted position . Before sitting in the seat , raise the head restraint to the extended position .
|
To raise : Pull the head restraint up . To lower :
Press the release button then push the head restraint down .
To remove :
Press the release button , and pull out the head restraint .
To install :
Push the head restraint into the holes on the top of the seatback until it locks . Press and hold the release button to lower the head restraint .
When the rear center seating position is occupied , raise the head restraint to the
– CONTINUED –
|