486
Replacing bulbs
8 . Pull the bulb out of the bulb socket and replace it .
9 . Set the bulb socket into the rear combination light assembly and turn it clockwise until it locks .
10 . Reconnect the electrical connector .
4 . Disconnect the electrical connector .
6 . Slide the rear combination light assembly rearward to remove it from the vehicle .
11 . Put the rear combination light assembly into place while aligning the 2 pins with the holes and secure to the vehicle .
5 . Using a Phillips screwdriver , remove the screws that secure the rear combination light assembly .
7 . Remove the bulb socket from the rear combination light assembly by turning it counterclockwise .