432
Towing
plugs . After using the rear tie-down holes , return the plugs to their original places .
WARNING
Use the rear tie-down holes only for downward anchoring . If they are used to anchor the vehicle in any other direction , cables may slip out of the holes , possibly causing a dangerous situation .
& Using a flat-bed truck
S09AF02
This is the best way to transport your vehicle . Use the following procedures to ensure safe transportation .
1 . Shift the select lever into the “ P ” position .
2 . Apply the parking brake firmly .
3 . Secure the vehicle onto the carrier properly with safety chains . Each safety chain should be equally tightened and care must be taken not to pull the chains so tightly that the suspension bottoms out .
CAUTION
. If your vehicle has a bumper under guard ( optional ), be careful not to scrape it when placing the vehicle on the carrier and when removing the vehicle from the carrier .
. Transport by flat-bed truck may cause the headlights to become misaligned . In such a case , have the headlight alignment checked by a SUBARU dealer after transporting the vehicle by flat-bed truck .
& Towing with all wheels on the ground
S09AF03
1 . Release the parking brake and put the transmission in the neutral position .
2 . The ignition switch should be in the “ ON ” position while the vehicle is being towed .
3 . Take up slack in the towline slowly to prevent damage to the vehicle .
WARNING
. Never turn the ignition switch to the “ LOCK ”/“ OFF ” position while the vehicle is being towed because the steering wheel and the direction of the wheels will be locked .