424
Flat tires
WARNING
Never place a tire or tire changing tools in the passenger compartment after changing wheels . In a sudden stop or collision , loose equipment could strike occupants and cause injury . Store the tire and all tools in the proper place .
15 . Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque , following the tightening order in the illustration . For the wheel nut tightening torque , refer to “ Tires ” FP498 . Never use your foot on the wheel nut wrench or a pipe extension on the wrench because you may exceed the specified torque . Have the wheel nut torque checked at the nearest automotive service facility .
1 Support holder
16 . Store the flat tire in the spare tire compartment . Install with the support holder facing upward and secure the flat tire by firmly tightening the attaching bolt .
NOTE
If you cannot fix the flat tire firmly , try turning the support holder upside down .
17 . Store the jack , jack handle and wheel nut wrench in their storage locations .
& Tire pressure monitoring system ( TPMS ) ( U . S . -spec . models )
S09AC02
Low tire pressure warning light
The tire pressure monitoring system provides the driver with the warning message indicated by sending a signal from a sensor that is installed in each wheel when