Keys 111 |
|||||
|
2-1 . Keys
S02AA
NOTE
For models with “ keyless access with push-button start system ”, refer to “ Keyless access with push-button start system ” FP111 .
The following keys are provided with the vehicle .
|
The valet key fits only the ignition switch and door locks . You can keep the glove box locked when you leave your vehicle and valet key at a parking facility .
NOTE
Locking / unlocking using the remote keyless entry system can also be controlled with the buttons on the key . For details , refer to “ Remote keyless entry system ” FP128 .
|
2-2 . Keyless access with push-button start system ( if equipped )
S02AP
The following access key fobs are provided with the vehicle .
|
Keys and doors |
||
CAUTION |
|||||
Do not attach a large key holder or key case to either key . If it bangs against your knees while you are driving , it could turn the ignition switch from the “ ON ” position to the “ ACC ” or “ LOCK ” position , thereby stopping the engine . |
1 Access key fobs 2 Key number plate |
||||
|
1 Master keys 2 Valet key 3 Key number plate
These keys can be used in the following locations .
. Ignition switch . Driver ’ s door . Glove box ( except the valet key )
|
& Key number plate
S02AA01
The key number is stamped on the key number plate attached to the key set . Write down the key number and keep it in another safe place , not in the vehicle . This number is needed to make a replacement key if you lose your key or lock it inside the vehicle . Refer to “ Key replacement ” FP127 .
|
The “ keyless access with push-button start system ” allows the following functions to be performed when the access key fob is being carried .
. Locking and unlocking of doors , rear gate and fuel filler lid ( For details , refer to “ Locking and unlocking by holding the access key fob ” FP115 .)
. Starting and stopping the engine ( For details , refer to “ Starting and stopping
|
|||
– CONTINUED – |