Advanced Adaptive Cruise Control
�Resuming Adaptive Cruise Control in stay-stopped status Setting using the RES / SET switch Even when the vehicle in front remains stopped , Adaptive Cruise Control can be activated by operating the RES /+ switch or SET / - switch . ( HOLD indicator ) and ( READY indicator ) turn off , and ( Adaptive Cruise Control indicator ) changes from white to green .
• Press the SET / - switch . The speed is automatically set to 20 mph ( 30 km / h ).
• Press the RES /+ switch . The vehicle speed that was set before the stay-stopped function activated is set again .
� Page 90
NOTE
• When Adaptive Cruise Control is resumed from stay-stopped status and the vehicle in front accelerates , your vehicle will also accelerate and continue to follow the vehicle in front at the previously set following distance . However , if the lead vehicle does not start moving or pauses , stay-stopped status will be automatically restored after approximately 3 seconds .
• While the engine is automatically stopped by the stay-stopped function * and Adaptive Cruise Control is activated , the engine automatically restarts and the Auto Start Stop indicator turns off when the vehicle in front starts moving . *: The Auto Start Stop system activates following activation of the staystopped function .
Setting with the accelerator pedal Depressing the accelerator pedal while stay-stopped is engaged cancels stay-stopped status . At this time , Adaptive Cruise Control is resumed . The vehicle will attempt to travel at the previously set vehicle speed unless a lead vehicle is detected . If a lead vehicle is detected , Adaptive Cruise Control will maintain the previous following distance setting .
WARNING
When the stay-stopped function is canceled , the vehicle will start . Make sure the surroundings are safe before canceling the stay-stopped function .
84