Conventional Cruise Control
To set the ready status : Conventional Cruise Control can be activated when all of the following conditions are met and ( READY indicator ) is displayed on the EyeSight display area . - All doors ( except the rear gate ) are closed . - The driver ’ s seatbelt is fastened . - The electronic parking brake is not engaged . The electronic parking brake indicator light is turned off .
- The select lever is in the “ D ” or “ M ”
( models with manual mode ) position . - The brake pedal is not depressed . - The road is not on a steep slope .
READY indicator
S03059
- The steering wheel has not been turned significantly in either direction . - The X-MODE is not turned on ( the X-MODE indicator goes off ). ( if equipped ) - The vehicle speed is between approximately 20 mph ( 30 km / h ) and 90 mph ( 145 km / h )*. *: For Mexico models , approximately 30 km / h and 200 km / h . - The engine is not running at a high rpm . - Vehicle Dynamics Control or the Traction Control Function is not active .
143