Conventional Cruise Control
( 2 ) Switch to Conventional Cruise Control . Press and hold the / ( Following distance setting ) switch for approximately 2 seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Control . A notification sounds 1 short beep . At this time , the following distance setting indicator on the EyeSight display area of the combination meter display turns off and ( Conventional Cruise Control indicator ) ( white ) is displayed .
Conventional Cruise Control indicator ( white )
S03397 S03210
To set the ready status : |
Conventional Cruise Control can be activated when all of the following conditions are |
met and |
( READY indicator ) is displayed on the EyeSight display area . |
- |
All doors ( except the rear gate ) are |
closed . |
- |
The driver ’ s seatbelt is fastened . |
- |
The electronic parking brake is not |
engaged . The electronic parking brake |
indicator light is turned off . |
- |
The select lever is in the
D
|
or
M
|
( models with manual mode ) position . - The brake pedal is not depressed . - The road is not on a steep slope . - The steering wheel has not been turned significantly in either direction .
READY indicator
S03059
- The X-MODE is not turned on ( the X-MODE indicator goes off ). ( if equipped ) - The vehicle speed is between approximately 20 mph ( 30 km / h ) and 90 mph ( 145 km / h ).
113