Start/Stop engine
Push-button ignition switch (if equipped)
To start engine:
STEP1: Carry the access key, and sit in the driver’s seat.
STEP2: Apply the parking brake.
STEP3: Shift the select lever in the P position.
STEP4: Depress the brake pedal until the indicator on
the push-button ignition switch turns green.
STEP5: While depressing the brake pedal, press the
push-button ignition switch.
Operation
indicator
To stop engine:
STEP1: Stop the vehicle completely.
STEP2: Move the select lever to the P position.
STEP3: Apply the parking brake.
STEP4: Press the push-button ignition switch.
Change of the power supply (Without starting engine)
Every time the button is pressed without depressing the brake pedal, the power is
switched in the sequence of OFF➞ACC➞ON➞OFF.
OFF (Turned off)
ACC (Orange)
Ignition switch (if equipped)
ON (Orange)
Electronic parking brake switch
Release
Apply
4
The key can be turned from ACC to LOCK only
when the select lever is in the P position and
the key is pushed in while turning it.
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.