Driver Monitoring System
! Changing the personalization settings
& Inattentive/drowsy driving
warning
S07BP0106
Item
Driver’s position personaliza-
tion
Meter personalization*
Multi Function Display perso-
nalization*
Climate control personaliza-
tion*
Seat position/outside mirror
angle
Reverse tilt-down outside mir-
ror angle
377
S07BP02
Change the setting by using the
combination meter display
customization function. Refer
to “ Menu screens” FP195.
Combination meter display ba-
sic screen
Multi Function Display basic
When the customization screen
with the synchronized
Customization linked with syn- linked
user function is selected and
chronized user function
the setting is changed, it is
automatically stored.
Climate control settings
Driver Monitoring System ON/OFF status
NOTE
. The inattentive/drowsy driving warn-
ing operates regardless of the status of
the user recognition function.
. The inattentive driving warning does
not activate when the turn signal is
operating or when the select lever is in
the “R” position.
. When the pre-crash brake OFF in-
dicator is illuminated on the combina-
tion meter display, the inattentive driv-
ing warning activates at the same
timing as usual even when a vehicle
ahead or obstacle is detected. For
details about the EyeSight system,
refer to the Owner’s Manual supple-
ment for the EyeSight system.
– CONTINUED –
*: When the Driver Monitoring System is OFF, the Driver Monitoring System continues to store the
conditions from immediately before the Driver Monitoring System was turned OFF even if the
screen was selected and the setting was changed.
While driving, the Driver Monitoring Sys-
tem monitors possible cases of driver
inattention or drowsiness and warns the
driver.
When the inattentive/drowsy driving warn-
ing activates, the buzzer sounds and an
interrupt display appears.