Vehicle Dynamics Control system
327
. Always turn off the engine before
replacing a tire. Failure to do so may
render the Vehicle Dynamics Control
system unable to operate correctly.
& Vehicle Dynamics Control
system monitor
S07AN01
Refer to “Vehicle Dynamics Control warn-
ing light/Vehicle Dynamics Control opera-
tion indicator light” FP176 and “Vehicle
Dynamics Control OFF indicator light”
FP178.
Type B
S07AN02
Type A
Press or turn the Vehicle Dynamics Con-
trol OFF switch to deactivate the Vehicle
Dynamics Control system. Creating ade-
quate driving wheel slip by deactivating the
Vehicle Dynamics Control system may
help to recover from the loss of traction.
Use the Vehicle Dynamics Control OFF
switch as necessary.
. A standing start on a steeply sloping
road with a snowy, gravel-covered, or
otherwise slippery surface
. Extrication of the vehicle when its
wheels are stuck in mud or deep snow
When the switch is pressed or turned
during engine operation, the Vehicle Dy-
namics Control OFF indicator light “ ” on
the combination meter illuminates. The
Vehicle Dynamics Control system will be
deactivated and the vehicle will behave
like a model not equipped with the Vehicle
Dynamics Control system. When the
switch is pressed again (type A) or turned
to the “NORMAL” side (type B) to reacti-
vate the Vehicle Dynamics Control sys-
tem, the Vehicle Dynamics Control OFF
indicator light turns off.
With the Vehicle Dynamics Control system
deactivated, traction and stability en-
hancement offered by the Vehicle Dy-
namics Control system is unavailable.
Therefore, you should not deactivate the
Vehicle Dynamics Control system except
– CONTINUED –
& Vehicle Dynamics Control
OFF switch