320
Power steering
& SI-DRIVE switches
S07BC01
“S” switch.
. To select the Sport Sharp (S#) mode,
press the “S#” switch.
7-9. Power steering
S07AJ
& Power steering warning light
S07AJ10
NOTE
Type A SI-DRIVE switches
Type B SI-DRIVE switches
. To select the Intelligent (I) mode, press
the “I” switch.
. To select the Sport (S) mode, press the
. While the engine is cool, you cannot
change to Sport Sharp (S#) mode.
. The next time you turn on the engine,
after you turned off the engine in the
Sport (S) mode or Sport Sharp (S#)
mode, the SI-DRIVE mode changes to
the Intelligent (I) mode.
. While the engine is running, if the
CHECK ENGINE warning light/malfunc-
tion indicator light illuminates, the SI-
DRIVE mode changes to the Sport (S)
mode (type A) or Sport Sharp (S#) mode
(type B). In this case, it is not possible
to change to another mode.
. If any of the SI-DRIVE indicators
blink, the SI-DRIVE system may be
malfunctioning. Contact your SUBARU
dealer.
& Power steering system fea-
tures
S07AJ11
The vehicle is equipped with an electric
power steering system. When the ignition
switch is turned to the “ON” position, the
power steering warning light on the com-
bination meter illuminates to inform the
driver that the warning system is function-
ing properly. Then, if the engine started,
the warning light turns off to inform the
driver that the steering power assist is
operational.