262
Automatic climate control operation
are delicate. If they are not treated properly
and become damaged, the system may
not be able to control the interior tempera-
ture correctly. To avoid damaging the
sensors, observe the following precau-
tions.
. Do not subject the sensors to impact.
. Keep water away from the sensors.
. Do not cover the sensors.
& Automatic climate control
customization
S04AI10
The automatic climate control can be
customized on the multi-function display.
Refer to “Setting screen” FP212 for
setting methods.
! Mode setting
S04AI1001
The climate control can be set in the
following mode.
! Normal mode
S04AI100101
Use this mode for normal climate control.
! Mild mode
S04AI100102
Use this mode for the mild airflow mode.
! Power mode
S04AI100103
Use this mode when climate control needs
to be operate to increase the comfort
quickly. This will reduce the operation
range of the Auto Start Stop function.
! ECO mode
S04AI100104
Use this mode when fuel efficiency is
prioritized over comfort. This increases
the range of the Auto Start Stop operation.
! Occupant detection
S04AI1003
This mode switches the climate control
operation according to the number of
passengers.
! Front occupant detection
S04AI100301
This mode detects passenger by the
occupant detection system sensor to set
the front passenger setting temperature
OFF when there is no front passenger in
the seat. The setting temperature will be
changed to the driver’s setting tempera-
ture automatically.
NOTE
The occupant detection system sensor
may not detect passengers because of
their posture, physical size or weight.
The front occupant detection function
may not operate properly.
! Rear occupant detection
S04AI100302
This function judges if there are any
passenger in the rear seat by the opening
and closing record of rear doors. If there
are no passenger in the rear seat, the
airflow of the climate control is reduced
and priority is on the front seat passenger.
NOTE
If the system cannot judge correctly if
there are passengers or not in the rear
seat by the opening and closing of the
rear door, such as when the doors are
opened to place some cargo in the
vehicle, the rear occupant detection
may not operate properly.