Subaru Forester Manuals 2019 Forester Owner's Manual | Page 202

196 Combination meter display (color LCD) ! RAB (if equipped) S03BN0712 ! Sonar Audible Alarm S03BN071204 When the Reverse Automatic Braking system is in operation, the warning sound to notify that an obstacle is detected in the rear can be activated or deactivated. . Rear Gate/Trunk Unlock (if equipped) Select only the rear gate to unlock or all doors to unlock simultaneously when accessing from the cargo area. NOTE ! Defogger S03BN070802 Sets and customizes the operation of the defogger. For models with Reverse Automatic Braking system, refer to “Reverse Automatic Braking System” FP362. ! Interior Light S03BN070803 Sets and customizes the interior light off delay timer. ! Vehicle Setting S03BN0708 After entering the “Vehicle Setting” menu, select one of the following menus. ! Auto Door Lock and Unlock S03BN070808 Setting conditions for Auto Door Lock and Unlock . Auto Door Lock: Set the condition of the following items to lock the door automatically. – Vehicle Speed: When the vehicle speed reaches more than 12 mph (20 km/h). – Shift Into or Out of PARK: When the select lever is shifted into a position other than the “P” position. – Off: When the function is set to OFF. ! Keyless Entry System S03BN070801 Sets the settings used when the keyless access function was operated. . Audible Signal (if equipped) Sets the electronic chirp that sounds when the door is locked or unlocked. . Hazard Warning Flasher Sets the operation of the hazard warning flasher that blinks when the door is locked or unlocked. . Driver Door Unlock (if equipped) Select only the driver’s door to unlock or all doors to unlock simultaneously when the driver’s door is unlocked. . Auto Door Unlock: Set the conditions of the following items to unlock the door automatically. – Shift Into or Out of PARK: When the select lever is shifted into the “P” position. – Ignition OFF: When the ignition switch is turned to OFF. – Driver Door Open: When the dri- ver’s door is open. – Off: When the function is set to OFF. ! Auto Light Sensor S03BN070804 Sets and customizes the sensitivity of the auto light sensor. ! Welcome Lighting S03BN070806 Sets the leaving time and approaching time. . Approaching time set Sets the illumination time of the headlights that illuminate when you approach the vehicle. . Leaving time set Sets the time until the headlights turn off when you have moved away from the vehicle.